Plasti Dip product information 2024/25

TECH DATA VLP VINYL AND LEATHER REPAIR page 33

PRIMER page 49

Bond strength:

(ASTM D-882) 7949 load

UV stability: Colour (wet): Colour (dry):

limited

SPECIFICATIONS

milky clear

Solids (wt): Shelf life: Coverage:

16%

SPECIFICATIONS

97 sqft (9 m 2) approx per gal at 2–3 mls 1 year @ 25°C (77°F)

Coverage:

1 year at 21°C

30 sqft (28 m 2 ) per litre approx

Solids (wt):

18%

Shelf life:

Temperature use range:

-23°C to 93°C (-10°F to 200°F) (ASTM D-882) 2,900psi

Temperature use range: -23°C to 93°C (-30°F to 200°F) SUPER GRIP page 35

Viscosity range: 200-400 cps Industrial/commercial airless equipment may be used Use as described in Equipment Settings Tip sizes: 011–019 Pressure: as needed Dilution: as needed RECOMMENDED EQUIPMENT AND SETTINGS Recommended equipment and settings: Gun: Binks model 62 Nozzle: 63PB Cap: 63PB Needle: 363-A Material: 15-20psi Atomization: 15-25psi Dilution: as needed Clean up:

Tensile:

52

Bond strength:

(ASTM D-882) 2602 load (ASTM D-882) 240%

SPECIFICATIONS Finish:

Elongation: Dry colour:

clear

Grippy

Viscosity range:

1,200–2,500 cps

Colour:

(dry) clear

60 sqft (56 m 2) per gal (approx) at 5 mls 1+year at 25°C (77°F)

Coverage:

Shelf life:

1+ year at 25°C (77°F)

Temperature use range:

21°C (70°F)

Shelf life:

37 sqft (35 m 2 ) per 326 g can

Coverage:

VYNA BOND PLASTIC REPAIR PATCH page 34

Surface preparation All surfaces to be coated must be dry, free of any oils, dust and moisture USE ADEQUATE VENTILATION

www.plastidip.co.uk Sales +44 (0) 1730 823 823 SPECIFICATIONS Solids (wt): Tensile: Peel strength:

16%

Plasti Dip THINNER, Toluene or Xylene

(ASTM D-882) 2400psi

(ASTM D-413) vinyl swatch de-laminates before Vyna bond (ASTM D-882) 935% @ 3 mls

Ultimate elongation: