Plasti Dip product information 2024/25

PROTECTIVE COATINGS MULTIPURPOSE FLEXIBLE COATING SPRAYING Pressure pot may be used (siphon cup not recommended)

OUTSIDE THE BOX

ANOTHER OF A MILLION USES FOR

COOLEST GARDEN SHED This green timber pavilion was created as part of the Made in Oakfield project, which was devised by architect Matthew Springett and educator Fiona MacDonald. Oakfield Residential School caters for pupils struggling in mainstream education. This project allowed students aged between 11 and 16 to design a learning space for the school’s allotment. The final build took just seven days. The entire structure was coated in Plasti Dip using the bespoke colour match service and chosen for its resistance to UV fading and weatherproof properties.

Dilute with Plasti Dip Thinners up to 50% as needed Gently mix before spraying Apply wet overlapping coats, holding gun 6 ʺ –12 ʺ from surface, using a 4 ʺ –6 ʺ pattern Allowing approximately 30 minutes drying time before applying additional coats to desired thickness

4

FULL INSTRUCTIONS page 46

www.plastidip.co.uk Sales +44 (0) 1730 823 823

Do I have to thin Plasti Dip for spraying? Yes. When using Plasti Dip Thinners thin Plasti Dip by 50% by weight. When applying Plasti Dip Enhancers – glossifier, pearl etc. – these will only require thinning by 10%.